-
-
-
-
-
Contact
News Center
He Jin Machinery Equipment Technology Taizhou Co., Ltd.
How to determine the loading capacity of the emulsion tank?
Release time:
2024-10-15
The production volume of the emulsion tank, the production volume of the emulsion tank is divided into large batches and small batches. Small batches can guarantee small batches under all conditions in production, and large batches can be produced according to the concept of "batch.
1. The production volume of the emulsifying tank, the production volume of the emulsifying tank is divided into large quantities and small quantities. Small quantities can guarantee small quantities under all conditions in production, and large quantities can be produced according to the concept of "batch.
2. The specifications and performance of the emulsifying tank stirring device, such as the length of the stirring shaft. When the emulsifying head is mixing the material, the material should not exceed the entire fixed rotor head. If the amount of material is small, the fixed rotor head cannot be too much, which will cause damage to the emulsifying head. Therefore, small batch production needs to combine whether the stirring paddle is stirring and stirring effect.
3. Comprehensive consideration of other factors of the emulsification tank, such as sampling port location, steam heating effect, economy, etc.
Generally speaking, the production capacity of the tank is designed according to the actual situation. If you cannot provide accurate production volume, you can also first determine the range of production volume (large and small) or customize small batch equipment that can achieve production results.
In the use of the emulsification tank, there are many types of emulsification processes, different operating conditions, different medium conditions, and different forms of the emulsification tank. Because the factors that affect the emulsification process and effect are very complex, involving fluid flow, viscosity, mass transfer, heat transfer, etc., the design of the emulsification tank needs to measure various factors. The import and export of emulsifying tank is an important part of tank design.
The joints of the emulsification tank are mostly open on the tank cover. The joints on the whole tank mainly include: inlet and outlet pipes required for material entry and exit, manholes and hand holes for installation and maintenance, sight glass joints for observing the stirring and reaction states of materials, thermometer interfaces for measuring the reaction temperature, safety device joints for ensuring safety, etc. The feed port is generally located at the top, and the discharge port is divided into two forms: upper and lower discharge.
The two discharge methods of the emulsion tank are suitable for different materials and production conditions. The lower discharge is suitable for medium with high viscosity or solid particles, and the upper discharge mode can be used for liquid or gas materials. When the material needs to be transported to a higher position or sealed transportation, a pressure pipe must be installed to discharge the material from the upper part.
Key words:
Related News
Contact Us
He Jin (Shanghai) Mechanical Equipment Engineering Co., Ltd.
Address: No.8, Xingqing Road, Qinggang Industrial Park, Qingcun Town, Fengxian District, Shanghai
He Jin Machinery Equipment Technology Taizhou Co., Ltd.
Address: Gangyang Town Industrial Park, Hailing District, Taizhou City, Jiangsu Province
E-mail:xuezhongqiu@126.com
